The RS15 is the first product to feature NEXO’s patent-pending RAY SUB Technology. Comprised of a 15 inch transducer with a frequency response of 35Hz – 200Hz in omni or 35Hz- 150Hz in directional mode and a sensitivity of 105db SPL, the RS 15 presents an unchallenged versatility for installation and touring requirements.

The RS15 sub does not face the same direction while in omni and cardioid mode. In cardioid mode, the RS15 sidewalls (where the rigging system is attached) behave as the cabinet's front and rear face

As such, RS15's cardioid LF and VLF energy propagates from only one end of the enclosure, rather than from the front face. This behavior is maintained regardless of whether speaker cones are positioned on the side or top.

PERFECTLY TANGENT, THOROUGHLY VERSATILE

The GEO S830 has proven the value and effectiveness of both vertical and horizontal tangent arrays. Its patent-pending Hyperboloid Reflective Wavesource creates tangent wavefronts whether the adjacent cabinets are additional S830s or 0.125°-5° GEO S805s.
The unique geometry of the HRW allows the S830 to be used as a down-fill for vertical tangent arrays of S805 modules, or as a 30° building block in horizontal tangent arrays. In either orientation, the S830 delivers totally coherent high frequencies, transparent midrange and solid low end with its neodymium 1"-exit compression driver and long excursion 8" cone transducer.

POWER & CONTROL
The primary objective of the strategic alliance created between NEXO and Yamaha in 2005 was to create products that would profoundly elevate system solutions in the sound reinforcement industry. NEXO was seeking a solution that would provide full optimisation and performance of its speaker systems.

Through the combination of NEXO’s renowned expertise in producing top-of-the-line sound reinforcement products and Yamaha’s internationally acclaimed professional audio division, two years of collaborative research using the latest-generation development and research tools have yielded a major breakthrough in high-powered amplification for both fixed and mobile applications.

The NXAMP 4X1 and 4X4 Powered TDControllers are based on an innovative design that will provide the full integration of speaker and amplifier control with output capacities that will allow end users a cost-effective solution.

The innovative control structure implemented into the NXAMP is via the latest generation of NEXO’s TDcontrollers. This full integration of control will provide a safety base and real-time performance that is the first of its kind, having all the parameters controlled by the DSP. This real-time control will offer end users the ability to manage the voltage/current/temperature sense lines from the amplifier's output, protecting both the amplifier and its power supply in real time, while simultaneously offering all control parameters required for the speakers.