M28-I
Compact 2 x 8-inch driver line array element providing 90°/120° of horizontal dispersion and 0° to 15° splaying angle between modules. The installation version of the M28 features Compass RigTM, allowing the pre-setting of inter-cabinet angle values.
Key Features
- Installation version of M28
- 2 x 8 inch LF Drivers
- 2 x HF Compression Drivers
- 141dB peak SPL
- Frequency response: 65Hz-19kHz
- H234mm/W575mm/D653mm
Specifications
| Frequency Response | 65Hz – 19kHz ±3dB |
| Usable Range @-6dB | 60Hz – 20kHz |
| Sensitvity 1W@1m | 106dB SPL Nominal (120° horizontal coverage) 107dB SPL Nominal (90° horizontal coverage) |
| Peak SPL@1m | 140dB Peak (120° horizontal coverage) 141dB Peak (90° horizontal coverage) |
| Dispersion | Configurable 90°-120° Horizontal x 0-15° vertical |
| Available Crossover Frequencies | 900Hz (Active) |
| Nominal Impedance | LF: 8 Ω (6 Ω min) - HF: 8 Ω (6 Ω min) |
| Amplified Controller | NXAMP4x4 - 3xSTM M28 in parallel on 2 NXAMP4x4 channels - 2x4000W/2Ω |
Features
| Components | LF: 2 x 8" (20cm) high excursion 16 Ω Neodymium drivers |
| HF: 2 x 2.5" voice coil, 1.4" throat Neodymium 16 Ω drivers, Ketone Polymer diaphragm |
| Height x Width x Depth | 234 x 575 x 653 mm – 9.2" x 22.6" x 25.7" |
| Construction | PU Composite Low Density – Polyurethane water based black coating |
| Front Finish | Perforated Dark Grey Metal Grille |
| Rigging | Integral 3 points flying system. Intercabinet angle adjustments from 0.2° to 15° in logarithmic steps. |
| System Operation | |
| Electronic Controller | The NEXO NXAMP4x4 presets are precisely matched to the STM Series cabinets and include sophisticated protection algorithms. Using STM Series cabinets without a properly connected NEXO NXAMP4x4 will result in poor sound quality and can damage components. |
| |
| |
| |
